EN - 50
Caution!
Only ever clean the filter with clean water and do not use soap or detergent. These would
destroy the filter.
Cleaning the exhaust air filter
The outlet air filter cleans the air a final time
before it leaves the vacuum cleaner. You can clean the outlet air filter as follows:
1) Switch off the vacuum cleaner and disconnect the plug from the mains. To do this
always pull on the plug and not on the cable.
2) Open the exhaust air grill (this is at the rear of the vacuum cleaner.)
3) The air filter is visible when the grill has been opened.
4) Rinse the filter under cold running water and allow dry.
5) Put the outlet air filter back into place (or replace with a new one) and place in the grill.
6) Close the outlet air filter grill.
VI. TROUBLE-SHOOTING
Faults can occur on all electrical equipment. This must not necessarily be due to a
defect in the device itself. So check first with table if the fault can be dealt with.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS / TIPS
Weak suction
The secondary valve is open. Close the secondary valve
An object is blocking the
suction pipe
Check the suction tube,
the handle area, suction
pipe and the nozzle in use
for blockages.
Filters are not fitted properly
or are blocked
Fit a new filter
Содержание ASP 618 WB
Страница 72: ......