EN
EN - 47
Suction control
Adjust the Suction control knob on the curved handle to
control the suction. The suction will be reduced with a larger
air opening.
Suction power
The suction power can also be regulated through power control knob P10.
Low vacuum power: For curtains and delicate fabrics
Medium vacuum power: For long-pile velour carpets and textile flooring
High vacuum power: For sturdy rugs and floors etc
After vacuum cleaning
Switch off the device when you have finished cleaning:
1) To do this press the foot button P9 on the device with your foot or by hand.
2) After this pull the mains plug from the socket.
3) To roll in the cable press foot pedal and hold it in position. The cable will be rolled back
automatically onto the installed cable drum and disappear completely into the device
up to the plug.
4) The floor nozzle can be kept attached to the vacuum cleaner for ease of storage after use.
V. CLEANING AND MAINTENANCE
Floor nozzle, brush
After any vacuuming it is recommended to check visually the brushes or collectors for
possible impurities. If there are some impurities, remove them.
Cleaning the turbo nozzle
If hair or threads are twisted around the mounting of the drive shaft and if they cannot be
removed in the way described above, the impurities have to be removed by dismantling the
nozzles. At the same time make sure the inside of the nozzle (i.e. turbine) is free of dust
and dirt. Unlock the two arrest bolts on the bottom of the nozzle in direction of the arrows
and remove the cover. Clean the space with a suitable tool (e.g. tweezers). Put the cover
back on the nozzle and put it in place (there will be an audible click).
Содержание ASP 618 WB
Страница 72: ......