3E2361 Weigh Scale W210 User Manual
4
Installing the loadbars
To install the loadbars, follow these steps:
Note:
Fit the loadbars as per the manufacturer's instructions.
1.
Bolt the platform to the loadbars.
2.
Ensure the platform is placed on a flat and level surface. Make sure it is
not touching any rails or gates.
3.
Either bolt the loadbars to the concrete pad or locate them on studs set
into the concrete. This will prevent the platform from moving during the
weighing session.
4.
Connect the loadbar cables to the Weigh Scale.
Note:
If you are using non Gallagher, loadbars ensure the loadbars are correctly
calibrated.
Installing the Weigh Scale
The Weigh Scale can be placed on a table top or mounted on the Weigh
Scale bracket supplied.
Position the Weigh Scale:
-
clear of the platform to ensure it does not interfere with the flow of
animals during the weighing cycle
-
within easy reach of the loadbar leads
-
within easy reach of the operator (for manual weighing), and
-
in a well-lit area
