3E2361 Weigh Scale W210 User Manual
6
Using an external 12 volt battery
To charge the Weigh Scale's internal battery using an external 12 volt battery,
follow these steps:
1.
Connect the supplied black and red battery leads to the Weigh Scale.
2.
Connect the other end of the battery leads to the 12 volt battery.
Connect the
Red
clip to the
Positive
terminal.
Connect the
Black
clip to the
Negative
terminal.
3.
Open the Weigh Scale case and make sure the battery charge icon
on the main screen is flashing. This indicates that the battery is
charging and will be displayed whether the Weigh Scale is turned on or
off.
Battery charge status
The amount of charge left in the battery is shown by the battery icon located
in the bottom left corner of the Weigh Scale's top screen.
Fully charged
Partially charged
Battery low
The battery icon shows the charge level in the battery under these conditions.
•
The Weigh Scale is switched on.
•
The battery is not being charged.
While the battery is charging, the battery icon cycles between low and full
charge.
Low battery warning
When the charge remaining in the battery drops to a very low level, the
battery charge icon on the Weigh Scale will start to flash and four beeps will
sound every 30 seconds. After about 15 minutes, the Weigh Scale will shut
down.
