Gallagher M6000i, Инструкция по эксплуатации

Страница: 20 / 36

English
Gallagher 3E5260 M6000i/M12000i Energizer User Manual
20
Save these instructions
TROUBLESHOOTING
Problem Causes Solution
Energizer has started to run
slowly
The internal temperature of
the energizer is too high
Mount the energizer in a cool
area, out of direct sun and
with adequate ventilation.
Displaying Error 11 Mains voltage is too high Have your power supply
checked by a professional
electrician.
Displaying Error 12 Mains voltage is too low Have your power supply
checked by a professional
electrician.
Displaying Error 14 - 19 Internal energizer fault Turn energizer off for 30
seconds then turn back on. If
the error remains return the
energizer to your Gallagher
dealer for servicing.
Displaying Error 21 Dead zone Check that the zone device
is connected and working
correctly.
Energizer output voltage is
low
There is a fault on the fence Remove any excess grass
growth or short circuits on
the fence.
Earth voltage is too high Earth system is inadequate Check connections to the
earth system. Add extra
earth stakes.
No output and display shows
( - - )
Energizer is in standby mode Exit standby mode by
pressing the standby button
on the controller.
WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on the product indicates that this product, packaging and with special
care of the battery must not be disposed of with other waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time of disposal
will help conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city
recycling office or the dealer from whom you purchased the product.