7
EN
3.
Preparing for use
3.1
First time
The following steps must be performed when using the Birth Alarm Lite for
the first time:
Unscrew the Birth Alarm Lite and remove the red label from the
pole of the battery. The batteries are now in contact with the
Birth Alarm Lite.
Depending on your country of residence, the SIM card may have
been provided.
-
If this is the case, the SIM card will already be inserted into
the SIM holder beneath the battery compartment
(see 5.3)
-
If this is not the case, then you must purchase and set up
the SIM yourself.
When you have done this, the SIM card
must be activated and slotted into the SIM holder.
(see 5.3)
The section entitled “Installing a new SIM card”
(see 6)
explains
how you can set up and install a newly purchased SIM card
yourself.
Once you have performed these steps on your new Birth Alarm Lite, you can
reseal it with the screws and proceed with the set-up.
If your own
mobile telephone has a good reception in the
stable or pasture where your mare is located,
we recommend that
you purchase a SIM card from the same provider.
