20
EN
8.
Testing
Before you start using the Birth Alarm Lite, it is essential that you first test it
to ensure that it is operating correctly. You can easily test the alarm yourself.
Preferably visit the location where your mare is
located with the Birth Alarm Lite.
Take the Birth Alarm Lite in your hands and switch it
on, so that the status indicator flashes green once
every 8 seconds.
Now turn the Birth Alarm Lite 90 degrees, so that
the status indicator is facing upwards.
The status indicator will now flash more rapidly and
will turn orange.
After a few seconds, the status indicator will turn
blue and the GSM LED will light up also.
The Birth Alarm Lite will now shortly begin dialling
the number programmed under “M1”.
Do not answer this call and, similarly, do not reject
it by pushing the red button. Simply allow the
telephone to ring out.
The Birth Alarm Lite will cease calling automatically
after a few seconds.
You can now stop the Birth Alarm Lite by simply
calling it. The Birth Alarm Lite will answer your call
and you will hear 3 tones as confirmation that you
have deactivated the Birth Alarm Lite. The Birth
Alarm Lite will then dial no further numbers until it
is once again turned 90° after a few minutes.
If the test proved successful, you can now install the Birth Alarm Lite on your
mare.
If you encounter any problems, please use the enclosed “Troubleshooter”.
