15
EN
7.
Programming telephone numbers
In order to change the settings of your Birth Alarm Lite, you must put the
device into programming mode.
7.1
Programming mode
In order to programme the Birth Alarm Lite directly, you must proceed as
follows:
Hold the rear end of the screwdriver to the red square ( ) next to the
symbol on the side of the box
for several seconds
Whilst you are doing this, the status indicator will first flash green 3 times,
then blue.
When the status indicator turns blue, you can remove the screwdriver.
The Birth Alarm Lite is now in programming mode.
7.2
Programming telephone numbers
Activate the Birth Alarm Lite's “Programming mode”
(see 7.1)
. Wait until
the Status indicator is flashing 1 x blue, 1 x green alternatingly.
Now call the Birth Alarm Lite with your (preferably mobile) telephone.
The Birth Alarm Lite will now receive your call and programme your
telephone number in the memory.
The Birth Alarm Lite will now call you back to confirm the number. Allow
your telephone ring out (i.e. do not answer and do not divert).
When you are finished with programming wait 2-3 minutes,
the Birth Alarm Lite will automatically exit the programming mode
and return to normal mode. The Birth Alarm Lite is now on and
ready for use.