Galcon AMC-6DC, Руководство пользователя

Страница: 21 / 48

Connecting the Solenoids/Valves
If the controllers are supplied separately, wire the solenoids/valves according to the following
instructions.
Note:
Use only non-stranded wires or stranded wires properly ended.
To connect the solenoids:
1. Route valve wires between control valve location and controller.
2. At the solenoids/valves, attach a common wire to each solenoid’s common wire.
3. Attach a separate control wire to the remaining wire of each solenoid/valve. Use waterproof con-
nectors for all wire splice connections.
4. Attach the gland cable thread size PG 9 to one of the openings on the bottom of the cabinet.
5. Route valve wires through the cable gland.
6. Strip some insulation from the ends of all wires and secure each valve’s common wire to its des-
ignated COM (Common) terminal.
7. Attach all individual valve control wires to their appropriate station terminals.
21 AMC Flushing Controller User Guide
Connecting to Main Power (AC Models)