Galaxy GS-202, Руководство по эксплуатации

Страница: 6 / 11

6
Operation Instructions
Connecting the System
1. CONNECT THE POWER CORD
1.1 Connect the power cord into a properly grounded electrical outlet with a sufficient
amperage rating.

VOLTAGE
120 Volt – The GS-202 and GS-203 requires a full 10 amp grounded circuit for
120 volt operation.
240 Volt –The GS-202 and GS-203 requires a full 5 amp grounded circuit for 240
volt operation.

EXTENSION CORDS If used, should be as short as possible and not less than
12 gauge.Heavy duty cords are recommended.

CIRCUITS that have less than 10 amps or that have other high demand
equipment or appliances(especially more than one heat seal machine) plugged in,
should not be used.
NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid hazard.
CAUTION Failure to follow these instructions will cause:
1) Erratic controller functions. 2) Inaccurate displays and slow heat-up. 3) The circuit
breaker to disengage.
Turn On the System
2. Switch The System On