background image

 

 

Safety Instructions 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Danger 

 

This Symbol stands for immediate danger, threatening the life and health of 
persons. Disregarding these instructions may cause severe damage to health 
and even serious injuries.

 

 

Caution 

 

This  symbol  stands  for  an  endangering  situation  that  may  occur.  Disregarding 
these instructions may lead to slight injuries or damage to property.   

 

Note 

 

This symbol stands for notes, operational hints and other useful information.   
They are convenient for exploiting the machine’s functional abilities.

 

Danger

 

 

Make sure that the machine is electrically grounded. This prevents an electric 
shock when there is a leak of electricity.   

Use the machine at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz 
to 60Hz.    A fire may start or the machine may break down if a higher or lower 
voltage is used, or if an electric current with a frequency that is not within the 
range of frequency stated above.   

Do not place any object on this machine. A fire may start or electricity may leak if 
water or a foreign object enters inside the machine.   

Handle the power cord with care. A fire may start or an electric shock may be 
caused if the cord is damaged, broken, or processed, if a heavy object is placed on 
the cord, or if the cord is bent forcibly.   

Do not pull the power plug out of or put it in the electric outlet using a wet hand. 
Otherwise, an electric shock may be caused.   

Do not remove the cover of this machine. Otherwise, an electric shock or injury 
may be caused.   

Do not remodel this machine. Otherwise, a fire may break out or an electric shock 
may be caused.   
If the machine is used when it is in an abnormal condition, such as generating heat, 
emitting smoke, and giving out a strange smell, a fire may break out or an electric 
shock may be caused. Turn off the power switch immediately and then pull the 
power plug out of the electric outlet. Afterward, consult with your dealer.   

If abnormalities such as the power cord generating heat and giving out a strange 
smell are found, turn off the power switch immediately and then pull the power plug 
out of the electric outlet. Afterward, consult your dealer.   

If a foreign object enters into the machine, turn off the power switch first and then 
pull the power plug out of the electric outlet. Afterward, consult your dealer.   

If thunderstorms occurs, pull the power cord out of the electric outlet to prevent a 
fire or breakdown caused by the falling of a lighting strike.   

Содержание FM600















Отзывы: