21
Step 10.
Place
bent arms with foam in front of the centre seam
of the cover as shown. Do this for the left and right side.
Important:
+
If the length of the face parallel to the cover
is less
than 2m, place the short ends on the seam of the
spa.
+
If the length of the face parallel to the cover
is 2m or
more, place the long ends on the seam of the spa.
Step 11.
Loop the
cover saver strap over the top horizontal
section of the straight arm with foam as shown.
Ensure the curved lip of the end bracket is facing
upwards.
Use the
velcro patch to attach the bracket to the spa
cover.
Step 12.
Use the last
straight coupler tube to connect the two
bent arms.
