Galaxy Audio DSPOT DS-SP36, Руководство пользователя

Страница: 25 / 40

24
Vu-Meter page – from this page it is possible to select what is shown on the Output LED meters, by using
the “PM1” or “PM2” encoders.
The outputs' LED meters can show the Output signal LEVEL or the Output Limiters' activity.
When the Limiters' activity is selected, the LED meters will show, from top down, the activity of the Limiter
on the output.
When the output Signal Level selected, the LED meters will show, from bottom up, the Level of the signal:
Name page – from this screen it is possible to assign a 6 character name to the Output Channel.
The following is an example screen for a “Name” page labeled “Low” for Output Channel 1:
To Edit, press ENTER on the Name Page and the entering arrow will appear as in the example below:
The first letter position will be blinking.
Select the Character position from the 6 available by rotating the “NAV/PM1” encoder, then by using the
“PM2” or “PM3” encoder it is possible to select the desired character.
When completed with name selection, press “ENTER” to confirm the edited Name. The new name will be
stored. The following example shows “Sub” replacing our previous name of “Low”:
Out-1 Name Vu-Meter
–› Vu-Meter = Limiter Act
Out-1 Name Vu-Meter
–› Vu-Meter = Level
Out-1 Low Name
Name = Low
Out-1 Sub Name
Name = Sub
Out-1 Low Name
–› Name = Low