4
9
a) A short power-supply cord(or detachable power-supply cord) should be used
to reduce the risk resulting from becoming entangled in or tripping over a
longer cord.
b) Longer detachable power-supply cords or extension cords are available and
may be used if care is exercised in their use.
c) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance; and
2) The cord should be arranged so that it will not drape over the countertop
or tabletop where it can be pulled on by children or tripped over
unintentionally.
If the appliance is of the grounded type, the extension cord should be a ground-
ing-type 3-wire cord.
8.Clean and maintain
Malfunction Code
：
E0
～
E8
Note
：
If no pots or pots unsuitable, the buzzer will sound to warn.
When any malfunction occurs during working, the inner checking system
will check ,the buzzer sounds and corresponding code will be shown on the
screen as follow :
Code
Malfunction
Malfunction
Code
E0
E2
E4
E6
E8
E1
E3
E5
E7
Circuit failure
Higher voltage
Sensor open circuit
Heating surface overheated
IGBT sensor short circuit
IGBT overheated
Lower voltage
Sensor short circuit
IGBT sensor open circuit
※
Before cleaning, please unplug to avoid electric shock!
※
Just remove the pot and wipe the surface. If the ceramic surface became
yellow use oxalic acid or teeth paste to clean it.
※
Do not place anything inflammable , acid or alkalic near the cooker to avoid
corrosion and short longevity .
※
Do not immerse the cooker in water and not use gasolene or benzene etc
detergent to clean. You should use soft damp cloth to wipe it.
※
Please do not rub the surface by the bottom of pots to avoid damage of the
plate.
※
Thoroughly clean the cooker before storing, cover it with plastic bag and
keep it in dry place.
3. Short cord instruction
