3
10
2. Caution
Use specified socket only(Current>15A).
Do not use water to wash the cooker directly,and
use damp cloth to clean it.
To avoid danger ,please do not heat
the empty pan on the plate.
To avoid electric shock,the air inlet and outlet should be
without any foreign objects such as iron wire.
Put the cooker evenly and at least 10cm far away from the wall
Do not place the cooker in high temperature and keep it away
from hot sources.
When heating canned food ,please open it first to avoid danger
of explosive.
Keep away from the reach of children after or during cooking.
Do not put any iron plate on the surface or bottom of the
cooker to avoid danger of overheat.
烫!
Hot!
9. Note
With the sluggish conduction of heat, empty pots and containers will be
destroyed or deformed even if this cooker has protecting function to deal
with this situation. So please do not heat empty hots and containers.
If any abnormal phenomenon, please unplug and contact our designated
service centre. Do not detach the cooker to avoid danger.
Please use pots and containers with smooth bottom,if not, the temperature
will not be high enough and lead to out of order. Do not use those made of
aluminium, copper or nonmetal.
This cooker does not heat small objects put on the heating surface. But you
had better not put metal forks, knives, spoons or watches on it , which will be
damaged after the cooker starts to work.
Try not to collide the ceramic plate. If broken, please cut off the power
immediately and send it to service centre for help.
To get the best efficiency, please use the provided pots. If use others, it may
cause out of order or poor efficiency.
It is normal that there will be difference for each cooker for the sluggish
temperature checking and different boiling point in different areas.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
If need repair, please follow the Guarantee Manual.
Use the cooker in correct temperature and humidity.
Do not touch the surface after using for it is still hot.
