18
Titan, Commander, SMART
2. Rotate the Front Casing through 180° taking care not to trap any
wires.
3. Continue the installation by making the appropriate connections
(section 7).
4. Reconnect the ringer. Secure the telephone Front Casing to the
Rear Casing.
7. Connections
If glands are used, insert the cable through the gland body and tighten the gland nut
sufficiently to clamp the cable, making a seal. Ensure sufficient cable is left to allow
removal of the faceplate or front casing without straining the cable.
IMPORTANT
: If only one gland entry is used, the BLACK blanking plug fitted to
the second gland position must be left in place.
7.1. Standard connections
Connect the telephone line A and B to the main terminal block CON1 as
shown.
The centre earth terminal is intended for connection to a local earth to provide
common mode protection from lightning transients. Particularly on Titan
(metal bodied) telephones,
if this terminal is not earthed there is an
increased risk that the telephone could be damaged by line-borne
transients.