8
Titan, Commander, SMART
5. Installation
5.1. General
IMPORTANT
All possible measures must be taken to ensure water, fluid or dust
does not contaminate the internal components of the telephone whilst
unpacking, preparing and installing the telephone in inclement weather
conditions or by negligence.
Failure to do so may invalidate your warranty.
These telephones are supplied without connection leads – cabling to the
telephone network must be supplied and installed by the installer. Because of
this, extra precautions must be observed: installers must ensure that they
have the permission of the owner of the PABX or telephone network to which
the telephone is to be connected, and that installation is carried out by trained
personnel. Contact GAI-Tronics if installation service is required.
IMPORTANT
Installation details differ between the TITAN and COMMANDER product
ranges –please make sure you know which product you are installing
and refer to the appropriate sections below.
5.2. Emergency Services warning
If the telephone is configured so that it cannot make a direct call to the
emergency services, check with your telephone service provider or
infrastructure maintainer whether it is necessary to warn users, and if so
provide a suitable warning notice. A warning label, which can be fixed
to the front of the telephone, is provided.
5.3. Titan
1. To prepare for installation, open the door (where fitted), then undo the
four retaining screws to remove the faceplate from the rear enclosure. A
3mm Allen key is required.
Caution – take care to support the spring-loaded door whilst open
to prevent it slamming shut and trapping fingers.
