Auteldac 4
24
3.6 Headset Operation
(refer to section 2.2.1 for hazard warning)
The Auteldac 4 can be supplied fitted with a headset option, permitting
hands-free operation. Only use the approved GAI-Tronics supplied
headset and headset extension cable.
To use:
1. Insert headset plug into marked connector, observing keyway.
2. To make or answer a call, turn the switch to the ‘I’ position.
3. To terminate the call, turn the switch to the ‘0’ position.
4. To remove the headset, pull the body of the connector to release the
latching mechanism. Do not attempt to disconnect the headset by
pulling the cable as damage may result.
NOTE: If the handset is lifted during a call using the headset, the handset
microphone will be muted. The handset can be used normally if a call is not
in progress via the headset.
The headset must be used in accordance with the manufacturer’s manual
(supplied with headset).
Содержание Auteldac 4
Страница 27: ...Auteldac 4 26 5 CE DECLARATION...