GAI-Tronics 13353, Инструкция по установке и эксплуатации

Страница: 34 / 57

Pub. 43004-034C
Model 13353, 13363, and 13373 Addressable Amplified Speakers Page: 29 of 52
f:\radio products-draft\gtc 43004\43004-034c\43004-034c.doc
05/10
Lead Speaker/Follow-Thru Operation
If only a single Slave speaker is connected to the Lead speaker in Follow-Me operation, both check boxes
in the
Secondary Audio Output
section of the Slave should remain unselected (default setting). If
multiple Slave speakers are connected to each other, as indicated in Figure 3, each Slave speaker must
have the
Audio Feed Thru
box selected and the
Page Output Contact Follows Broadcast Audio
box must be checked, as indicated in the following screen.
N
OTES
:
1. The
Page Output Contact Follows Broadcast Audio
box is to be checked (enabled) only in
Follow-Me operation and when a downstream slave speaker is connected (Lead or Slave speaker
programming).
2. The
Enable Volume Level Tracking
and
Audio Feed Thru
boxes under Secondary Audio
Output are mutually exclusive. This means that only one can be enabled (checked) at a time. To
switch between the two boxes requires the checked box to be un-checked (disabled) first.
3. The
Default Reset
button in the lower right-hand corner of the Advanced screen, when pressed, will
reset all values on that screen to the factory default settings.