Pub. 42004-404E
M
ODEL
10959-207
AND
-208
R
ACK
-M
OUNT
A
UDIO
M
ESSENGER
I
NTERFACES
P
AGE
13 of 19
f:\standard ioms - current release\42004 instr. manuals\42004-404e.doc
03/11
Operation
Once the CompactFlash
®
is programmed and installed into the unit, the unit operates based on system
inputs and outputs or by manual operation from the front of the rack-mount unit.
LCD Display at Initial Power Up
At initial power up, the AMI unit completes a self-diagnostic of its settings. The LCD display cycles
through the following messages:
•
AMI firmware version
•
Boot DSP
•
Media detected
•
EEPROM firmware version
•
DSP firmware version
•
Progress bar/LOAD CONFIG
•
Configuration version
•
Configuration date and time
•
Configuration file name
•
HIO (I/O control module) board firmware version or “HIO not installed.”
•
ASM (Zone Interface Module) board firmware version or “ASM not installed.”
•
Page/Party
®
board firmware version
•
AMI Main board firmware version
•
Telephone Interface Mode (if telephone interface installed)
•
Telephone Interface Board firmware version or “Telephone Interface not installed.”
•
Telephone Interface Greeting file name (if recording a new greeting)
•
AMI ready
•
Time, page symbol/date