GAI-Tronics 10959-207 Скачать руководство пользователя страница 13

Pub. 42004-404E 

M

ODEL 

10959-207

 AND 

-208

 

R

ACK

-M

OUNT 

A

UDIO 

M

ESSENGER 

I

NTERFACES

 

P

AGE 

11 of 19

 

f:\standard ioms - current release\42004 instr. manuals\42004-404e.doc 

03/11 

Jumper Settings 

600-Ohm Line Termination 

The unit can terminate the 600-ohm line with 600 ohm for impedance matching.  P5 on the termination 
board in position 1-2 terminates the line to 600 ohm.  P5 in position 2-3 (default) does not terminate the 
line. 

AUDBUS1 Termination 

The unit can terminate the AUDBUS1 with 600 ohm for impedance matching.  P1 on the termination 
board in position 1-2 terminates the line to 600 ohm.  P1 in position 2-3 (default) does not terminate the 
line. 

AUDBUS2 Termination 

The unit can terminate the AUDBUS2 with 600 ohm for impedance matching.  P6 on the termination 
board in position 1-2 terminates the line to 600 ohm.  P6 in position 2-3 (default) does not terminate the 
line. 

Audio Contact Supervision 

The unit can configure the audio contact (AUD ACT) to an unsupervised or a supervised contact.  P11 on 
the termination board in position 1-2 configures the audio contact to a supervised for use with an 
ADVANCE cabinet.  P11 in the position 2-3 (default) configures the audio contact to an isolated SSR 
contact. 

Level Adjustments 

Display Brightness 

R237 on the Main PCBA adjusts the brightness of the LCD display on the front of the assembly. 

Phone Line Levels 

On the optional Telephone Interface PCBA two potentiometers adjust phone audio levels.  The Receiver 
Volume potentiometer, R36, adjusts the volume level from the telephone line.  The Transmit Volume 
Potentiometer, R1, adjusts the volume to the telephone line. 

Party Line Levels 

On the Page/Party

®

 Interface PCBA two potentiometers adjust party line audio levels.  The Party Volume 

potentiometer, R66, adjusts the volume level to the party line.  The Party Sidetone Potentiometer, R30, 
adjusts sidetone level from the party line. 

Page Line Levels 

On the Page/Party

®

 Interface PCBA two potentiometers adjust page line audio levels.  The Page Volume 

potentiometer, R39, adjusts the volume level to the page line.  The Page Monitor potentiometer, R69, 
adjusts monitor level of audio activity on the page line. 

Содержание 10959-207























Отзывы: