GAI-Tronics 1090, Инструкция по установке и эксплуатации

Страница: 18 / 24

18 VR & Help Point
8. Cleaning
Recommended cleaning methods are outlined below:
8.1. Normal Cleaning
For normal cleaning we recommend "Virosol", manufactured by Clover
products.
Carefully follow manufacturer's instructions for storage, handling and use.
8.2. Stainless Steel Push-buttons
Stainless steel push-buttons, where fitted, should be cleaned regularly
especially if the Help Point is in a marine environment. The stainless steel
may show signs of discolouration or rust – this will not damage the buttons or
impair their performance but may look unsightly and can be cleaned off using
normal cleaning agents as above. In extreme cases a mild abrasive may be
necessary.
8.3. Graffiti
For graffiti, paint and ink we recommend the use of 3M GR1 graffiti stain
remover.
CAUTION: This is a very aggressive chemical. Pay close attention to the
manufacturer's recommendations for storage, handling and use.
8.4. Anti-Graffiti Coating
Where polyurethane anti-graffiti coating or paint has been specified (as an
option), it can be cleaned using Methylated Spirits or Methyl Isobutyl Ketone.
Other cleaners can be used but should be tested on a small area first
9. Aftercare
The purchase of your GAI-Tronics product does not end our commitment to
you.
In addition to our warranty obligations, GAI-Tronics are able to offer various
levels of maintenance packages, installation and commissioning packages and
technical support, from ad-hoc repairs to full maintenance contracts.
By choosing GAI-Tronics as your aftercare provider you are ensured of
manufacturer expertise and ISO 9000-certified quality control standards
throughout the life of the product.
We can also supply a full range of accessories including mounting posts,
beacons and high-volume sounders.
Contact GAI-Tronics for details.
www.gai-tronics.co.uk