8
STEP 6 - Canopies
To attach Rear Canopy:
1.
Position
Rear Canopy (F)
with rounded front section on
top and place canopy in rear seat area and over top
of front seats.
2.
Secure
Main Canopy Tube (V)
by pushing
end of
Main Canopy Tube
into
Canopy Retainer (Z)
slot
located on outside of
Handle (X)
near the
Armrest (W)
(Fig. 1)
.
3.
Secure short
Rear Canopy Tube
(Y)
by pushing
end of
Canopy Tube
into
Canopy Retainer (Z)
slot
located on outside of the handle near the top of the
back seat
(Fig. 2)
.
Repeat steps
2
and
3
to secure canopy tubes on other
side of stroller.
Fig. 2
Y
Z
X
Fig. 1
V
W
Z
4.
Secure back of
Rear Canopy (F)
.
- Fold back panel of canopy forward , pull
rear canopy tube rearward and attach canopy
fabric over handle support tube with fabric
hook and loop fasteners
(Fig. 3)
.
- Slide back panel of canopy (T) down between
handle support tube (U) and stroller handle
(Fig. 4)
.
- Secure canopy sides around stroller handle
support tube by securing hook & loop fasteners
on each side
(Fig. 4)
.
- Repeat on other side of canopy.
Note:
To remove Rear Canopy, follow steps above in
reverse order.
Fig. 3
T
1
1
2
2
U
2
2
Fig. 4
4
3
4
Style May Vary
1
2
3
4
