STEP 3 - Front Wheel Assembly
6
1.
Unfold stroller (see “Operation and Use” section).
2.
Tip stroller back on rear wheels until handle contacts
floor
(Fig. 1)
.
3.
Gather all parts required for assembly. Locate
M6 x 25 Shoulder Screw (K)
,
Lock Washer (L)
,
and
Flat Washer (M)
in parts bag. Locate
Front
Wheel Assembly (D).
4.
Remove protective packaging material from
Front
Wheel Post (Fig. 2)
.
NOTE:
Hold bearing (Y) on front wheel post (X) while
removing protective packaging materials
and parts bag.
Fig. 2
Fig. 1
Y
X
5.
While holding bearing on front wheel post, position
Front Wheel Assembly (D)
so bearing race (Z) is
facing front wheel post (X) and bearing (Y) inside
Front
Wheel Assembly
is on opposite side, slide
Front Wheel
Assembly
onto front wheel post and bearing
(Fig. 3)
.
6.
Slide
Lock Washer (L)
and
Flat Washer
(M)
onto
M6 x 25 mm Shoulder Screw (K)
and then insert screw into bottom of front
wheel post and tighten securely
(Fig. 4)
.
Repeat steps
2
thru
6
to assemble
front wheel on other side of stroller.
Fig. 3
Fig. 4
Z
Y
M
L
K