Gaggia Milano SUP047RG, Руководство пользователя

Страница: 9 / 88

A
R O
MA STR
ENGTH
- AROMA STRENGTH button = OK button: press this button to select,
confirm or stop a function.
CAPPUCCINO
- CAPPUCCINO button = UP button: press this button to scroll up through
the display menu.
SPECIA
L DR
INK
S
- SPECIAL DRINKS button = DOWN button: press this button to scroll down
through the display menu.
First installation
This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however,
that the machine is absolutely new.
Like with most full-automatic machines, you first need to brew some coffees
to enable the machine to complete its self-adjustment and get the best
tasting coffee.
1
Remove all packaging material from the machine.
2
Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides
of the machine.
3
Slide the drip tray with drip tray cover into the machine.
4
Remove the water tank.
5 Fill the water tank with fresh water to the MAX level indication.
6
Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
7
Insert mains plug into a wall socket (1) and insert the small plug into the
socket located on the back of the machine (2).
8 Place a container under the hot water and coffee dispensing spouts.
Check if the hot water dispensing spout is installed correctly.
9
Press the standby button to switch on the machine.
10 Press the OK button to start the automatic circuit priming cycle.
8
English