Gaggia Milano RI9603, Руководство по эксплуатации

Страница: 16 / 76

16
English
Installing the water filter
Remove the small white filter from the water tank and store it in a dry place.
Immerse the water filter vertically (with the opening pointing up) in cold
water and gently press its sides to let any air bubbles out.
Place the filter in the water tank, ensuring it is correctly in place. Refill
the water tank and place it in its compartment.
Follow the instructions shown on the display to activate the filter.
Note : you can pause the filter activation procedure by pressing the START/STOP
START/STOP
button. To resume the procedure, press the START/STOP
START/STOP
button again.
Remove the water filter from the water. Set the machine according to
the detected water hardness (see the "Measuring water hardness" chapter) and the
letters found on the filter base:
A = soft water – 1 or 2 small squares
B = hard water (standard) – 3 small squares
C = very hard water – 4 small squares
Replacing the water filter
When the water filter runs out, the display will show an alarm message.
1 Replace or deactivate by pressing the CLEAN/SETTING
clean/setting
button, and then
the " SETTINGS " button.
2 Select the " WATER FILTER " button.
3 Select " REPLACE " to change the filter or " DISABLE " if you do not intend to
use the filter. Confirm with the " " button.
Follow the instructions shown on the display to activate the filter correctly.
START/STOP ON/OFF my favourites HOME clean/setting
WATER FILTER
REPLACE
ACTIVATE
DISABLE
START/STOP ON/OFF my favourites HOME clean/setting
Filter expired, replace
or disable it
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US.indd 16 23/04/2020 09:57:35