30
English
Problem
Cause
Solution
The milk does not froth.
The classic pannarello may be
dirty.
(model with classic pannarello)
Clean the classic pannarello as described in
the chapter "Cleaning the classic pannarello".
Make sure that all the classic pannarello
components have been correctly assembled
The steam wand nozzle is clogged.
(model with steam wand)
Wash the steam nozzle with running water and
clean the circuit by dispensing a small quantity
of hot water
The type of milk used is not
suitable for foaming.
The amount and the quality of froth vary
depending on the type of milk.
The “” filter
cannot be inserted.
Remove the air from the filter.
Let the air bubbles out of the filter.
The tank still contains some water.
Empty the water tank before installing the filter.
The rubber seal is not inserted onto
the
“” filter.
Check the packaging and insert the seal onto
the
“” filter.
You can not activate the
“” filter.
Another filter is already active
The machine indicates the filter usage in
percentage.
However, if you want to activate a new filter
before the one currently in use has expired, the
latter must be disabled first as described in the
section “Replacing water filter”
There is some water
under the machine.
The drip tray is too full and has
spilled over.
Empty the drip tray when the mark appears
though the tray. Always empty the drip tray
before starting the descaling procedure.
The machine is in
DEMO mode.
While switching on the machine,
you pressed a combination of
buttons (
HOME
HOME
-
CLEAN/SET
clean/setting
–
HOME
HOME
-
CLEAN/SET
clean/setting
).
Switch the machine off and on again, with the
ON/OFF
ON/OFF
button on the control panel.
4219-465-02411 MAN. GAG. MAGENTA Plus EN-NL-PL Rev 01.indd 30
09/09/2020 17:00:48
