en
Installation instructions
12
¡
Switch off the power supply before carrying
out any work.
¡
Never use this appliance in boats or in
vehicles.
¡
Follow the worktop manufacturer's recom-
mendations.
12.4 Instructions for the electrical
connection
In order to safely connect the appliance electrically, ob-
serve this information.
¡
Check the household wiring before connecting the
appliance. Ensure that there is sufficient fuse protec-
tion for the household wiring. The voltage and fre-
quency of the appliance must match the electrical
installation (see rating plate).
¡
Ensure that the power supply is properly earthed,
that the fuse protection is sufficient and the cable
and wiring system in the building is sufficiently di-
mensioned for the electrical power of the appliance.
¡
Route the connection cable in such a way that it
does not touch the hot casing.
¡
Use only the connection cable that is supplied with
the appliance or is provided by technical customer
service.
¡
This appliance complies with the EC interference
suppression regulations.
¡
The appliance corresponds to protection class 1.
You should therefore only use the appliance with a
protective earth connection.
¡
Ensure that the protection against contact is guaran-
teed during installation.
¡
Only a qualified electrician may connect appliances
without a plug. They are subject to the requirements
of the local electricity provider. We recommend in-
stalling a residual-current-operated circuit-breaker
(RCCB) in the appliance's power supply circuit.
¡
Carry out the electrical connection in accordance
with the installation instructions. The appliance may
be damaged if it is not connected correctly.
¡
The manufacturer shall assume no liability for mal-
functions or damage resulting from incorrect elec-
trical wiring.
¡
We recommend installing a socket equipped with
protective-earth contacts behind the appliance, ap-
proximately 70 cm above the floor, in accordance
with regulations. Only a qualified electrician may in-
stall a protective contact socket in accordance with
the relevant regulations.
12.5 Safe installation
Follow these safety instructions when installing the ap-
pliance.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
It must always be possible to disconnect the appliance
from the electricity supply. The appliance must only be
connected to a protective contact socket that has been
correctly installed.
▶
The mains plug of the mains power cable must be
easily accessible after installation of the appliance.
▶
If this is not possible, an all-pole isolating switch
must be integrated into the permanent electrical in-
stallation according to the conditions of overvoltage
category III and according to the installation regula-
tions.
▶
The permanent electrical installation must only be
wired by a professional electrician. We recommend
installing a residual-current circuit breaker (RCCB)
in the appliance's power supply circuit.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Wear protective gloves.
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶
Connect and operate the appliance only in accord-
ance with the specifications on the rating plate.
▶
Connect the appliance to a power supply with al-
ternating current only via a properly installed socket
with earthing.
▶
The protective conductor system of the domestic
electrical installation must be properly installed.
▶
Never equip the appliance with an external switch-
ing device, e.g. a timer or remote control.
▶
When the appliance is installed, the mains plug of
the power cord must be freely accessible. If free ac-
cess is not possible, an isolating switch must be in-
tegrated into the permanent electrical installation ac-
cording to the installation regulations.
▶
When installing the appliance, check that the power
cable is not trapped or damaged.
12.6 Information about the installation room
For safe operation, observe the following information
regarding the installation area.
¡
Install the appliance in accordance with the installa-
tion diagram.
¡
Observe the minimum clearance from the side
walls, parts of the cupboard, and to the rear.
Содержание VP414115
Страница 1: ...en User manual and installation instructions VP414115 Teppanyaki Gaggenau...
Страница 19: ......
