Gaggenau VI492115, Руководство пользователя и инструкции по установке

Страница: 36 / 44

en
Installation instructions
36
Creating ventilation openings
Requirement:
The appliance requires sufficient ventila-
tion from below to function correctly.
1.
Make a unit cut-out in the upper area on the rear of
the unit.
2.
Observe the minimum clearances.
3.
If there is no minimum clearance at the rear of the
unit, make a unit cut-out in the bottom of the unit.
min.
20
4.
Ensure that the base of the unit is sufficiently ventil-
ated.
5.
When installing in a cooking island, ensure that the
appliance is well ventilated.
Making the cut-out for the control knob
1.
Create the holes for the control knob in accordance
with the enclosed instructions.
2.
If the panel is more than 23 mm thick, cut out the
rear of the front panel for the retaining plate.
3.
Note the clearances between the control knobs.
4. After making the cut-outs, remove any shavings.
5.
Seal the cut surfaces so that they are heat-resistant
and waterproof.
26.11 Installing the mains cable
On appliances that do not have a pre-installed cable,
you must insert the power cord into the mains socket.
1.
To prevent scratches, have a cloth or the packaging
ready.
2.
Turn the appliance over and put it down on the base
of the packaging, a cloth or another surface in order
to prevent scratches.
3.
Use a screwdriver to lift up the cover of the mains
socket.