Gaggenau VI492115, Руководство пользователя и инструкции по установке

Страница: 35 / 44

Installation instructions
en
35
4.
Mark the unit cut-out in accordance with the installa-
tion diagram.
5.
Ensure that the angle of the cut surface to the work-
top is 90°.
6.
Remove dust and residues from the cut-out work.
Seal the cut surfaces so that they are heat-resistant
and waterproof.
7. Provide an intermediate floor between the appliance
and the top drawer.
8. Observe the clearance between the intermediate
floor and the worktop.
9.
If the width of the inside of the unit is less than
880 mm, make unit cut-outs on the side panels.