Gaggenau VI414115, Руководство пользователя и инструкции по установке

Страница: 19 / 40

Home Connect
en
19
1.
Push the control knob in. While the control knob is
pushed in, carry out the following steps without in-
terruption:
‒
Turn the control knob one notch anti-clockwise to
position ⁠ ⁠.
‒
Turn the control knob three notches clockwise to
position 1 ⁠.
‒
Turn the control knob two notches anti-clockwise
to position 0 ⁠.
a lights up.
a
The illuminated ring on the control knob lights up
yellow.
2.
Press ⁠.
The displays show the product information.
Product information Indicator
Customer Service Index
(CSI)
Production number
Production number 1
⁠ ⁠.
Production number 2
3.
Press again.
a The basic settings menu is opened.
a
and light up.
4.
Press repeatedly until the desired function is
shown on the display.
5.
Use and to select the required setting.
6.
Press and hold for at least 4 seconds.
a
The settings are saved.
7.
Exit the basic settings menu → Page 19 .
16.3 Exiting the basic settings menu
▶
Push the control knob in. While the control knob is
pushed in, carry out the following steps without in-
terruption:
‒
Turn the control knob one notch anti-clockwise to
position ⁠ ⁠.
‒
Turn the control knob three notches clockwise to
position 1 ⁠.
‒
Turn the control knob two notches anti-clockwise
to position 0 ⁠.
a
goes out.
a The illuminated ring on the control knob goes out.
17 Home Connect
This appliance can be networked. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its current operating status. It is not pos-
sible to perform a remote start or set a power level.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
"Safety", Page 3
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
¡
Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
17.1 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect has
been set up and whether the appliance is connected to
your home network.