Gaggenau VI23212 Series, Руководство пользователя и инструкция по установке, Страница: 20 / 24

en
Installation instructions
20
1.
When making the unit cut-out, allow extra space for
the connecting strip between the appliances.
‒
Observe the installation instructions for the con-
nection strip.
2.
If required, install the appliances in individual cut-
outs.
‒
Maintain a bar width of at least 40 mm between
the individual cut-outs.
17.8 Installation accessories
Here, you can find an overview of the installation ac-
cessories.
Use the accessories only as specified. The manufac-
turer shall accept no liability if you use the accessories
incorrectly.
Accessories Order number
Appliance cover, black VD200020
Connecting strip, stain-
less steel VV200010
Connecting strip, black VV200020
17.9 Preparing the unit
ATTENTION!
A fan is located on the underside of this hob.
▶
If a drawer is located on the underside of the hob,
do not store any small or pointed objects, paper or
tea towels in it. These objects may be sucked in
and damage the fan or impair the cooling.
▶
There must be a clearance of at least 2 cm between
the contents of the drawer and the fan entry point.
Requirements
¡
The fitted units are heat-resistant up to 90 °C.
¡
The worktop is level, horizontal and stable.
1.
Follow the instructions on combining several appli-
ances.
→
"Combining multiple appliances", Page 19
2.
Ensure that the thickness of the worktop corres-
ponds to the required minimum thickness.
3.
Maintain the minimum clearance from the upper
edge of the worktop to the upper edge of a drawer
installed below it.