10
Installation of control console
Note:
Only install the appliance in conjunction with
the corresponding control console.
1
Remove the packaging of the control knob and
the protective film from the light ring.
2
Hold the retaining plate against the front panel
from behind. Stick the control knob into the hole
from the front and screw it tight from behind with
the nut. Ensure the setplate against torsion with
the enclosed screw.
3
Screw the control console tight to the retaining
plate using the nuts included.
Install Appliance
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the
OFF position.
1
Remove plug protection on the underside of the
stovetop. Connect control console cable with
socket according to the figure. Plug must engage.
Fix grounding with the screw enclosed and fix
cable in the strain relief. Fit plug protection again.
