Gaggenau DI260110CN Скачать руководство пользователя страница 33

Страница: 33 / 44

Fault, what to do?

Fault table

Fault

Cause

Remedial action

Error code

“

‚‰

is lit.

Supply hose kinked.

Install supply hose without kinks.

Tap turned off.

Turn on the tap.

Tap jammed or calcified.

Turn on the tap.
Flow rate must be min. 10 l/min. when water
supply is open.

Filter in the water supply blocked.

Switch off the appliance and pull out the
mains plug. Turn off the tap. Unscrew water
connection.

Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
appliance.

Error code

“

‹ˆ

is lit.

Intake opening (on right inside of
appliance) covered by utensils.

Arrange utensils so that the intake opening
is not obstructed.

Error code

“

‚ƒ

is lit.

Heating element calcified or soiled.

Clean appliance with dishwasher cleaning
agent or descaler. Operate the dishwasher
with water softening system and check the
setting.

Error code

“

ƒƒ

is lit.

Filters

are soiled or blocked.

Clean filters.

Error code

“

ƒ…

is lit.

Waste-water hose kinked or blocked. Install hose without kinks, remove any

residue.

Siphon connection still sealed.

Check connection to siphon and open if
required.

Cover on the waste water pump
loose.

Lock cover correctly.

Error code

“

ƒ†

is lit.

Waste water pump blocked or cover
on the waste water pump is not
locked in position.

Clean pump and lock cover correctly.

Error code

“

ƒˆ

is lit.

Mains voltage too low.

Not an appliance fault, have the mains
voltage and electrical installation checked.

A different error code is
indicated on the digital display.
(

“

‹‚

“

„‹

)

A technical fault has probably
occurred.

Switch off appliances with the ON/OFF
switch

(

. After a short time restart the

appliance.
If the problem recurs, turn off the tap and
pull out the mains plug.
Call customer service and mention the error
code.

Display flashes.

Door not closed properly.

Close the door. Ensure that no objects
(utensil, fragrance dispenser) are
protruding over the basket and preventing
the door from closing.

Refill indicator for salt

and/

or rinse-aid

is lit.

No rinse aid.

Refill rinse aid.

No salt.

Refill with special salt.

Sensor does not detect salt tablets.

Use different special salt.

Содержание DI260110CN













































Результаты поиска

Содержание DI260110CN

Отзывы:

Похожие инструкции для DI260110CN

Бренды по названию

Популярные бренды

Gaggenau DI260110CN, Инструкция по эксплуатации

Результаты поиска

Содержание DI260110CN

Отзывы:

Похожие инструкции для DI260110CN

Бренды по названию

Популярные бренды