Gaggenau DI250440, Руководство по эксплуатации

Страница: 22 / 34

22
Fault, what to do?
Spray arms
Limescale and contaminants in the rinsing water may
block nozzles and bearings on the spray arms
1:
and
1J
.
1 Check outlet nozzles on the spray arms
for blockages.
2 Unscrew the upper spray arms
1:
(1/4
revolution).
3
Remove the lower spray arm
1J
upwards.
4
Clean spray arms under running water.
5 Re-engage or screw on spray arms.
Fault, what to do?
Experience has shown that you can rectify most faults
which occur in daily operation yourself. This ensures
that the machine is quickly available to you again. In
the following overview you can find possible causes
of malfunctions and helpful information for rectifying
them.
Note
If the appliance stops during dishwashing or does not
start for no obvious reason, first run the Abort
programme function (Reset).
(See chapter entitled “Operating the appliance”)
m
Warning
Don’t forget: Repairs may be carried out by
technicians only. If a component has to be replaced,
ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts
may cause considerable damage and put the user at
considerable risk.