Operating the appliance
en
35
Eco forecast
When Eco forecast is activated, the average water and
energy consumption of the selected programme is
briefly displayed on the display window at the top
@
.
AutoPowerOff (Switching off
automatically after the end of the
programme)
Auto Power Off
To save energy, the dishwasher is switched off 1 minute
after the programme ends. You can also change this
setting.
Possible settings are:
▯
off:
The appliance does not switch off automatically.
▯
After one minute:
The appliance switches off after 1
minute.
▯
After two hours:
The appliance switches off after 2
hours.
Note:
Note that for the settings "After one minute" and
"After two hours", the interior lighting
1"
is switched
off. To activate the interior lighting, press the ON/OFF
switch
(
.
Emotion Light *
Emotion Light
* Depending on the features of your dishwasher
You can switch the Emotion Light
1"
on or off.
Notes
▯
Depending on the setting of the automatic switch-off
function, the interior lighting is either switched on or
off.
▯
Note that the interior lighting is automatically
switched off after 1 hour when it is switched on and
the door is open.
Front display *
Front display
* depending on the features of your dishwasher
You can switch the front display
):
on or off
(additional programme information).
Remaining time projection (Optical
display while the programme is
running) *
Remaining time projection
* depending on the features of your dishwasher
While programme is running, an optical display
(additional programme information) is indicated on the
floor under the appliance door. If the base panel is
pulled forwards or if the appliance is installed at eye-
level with flush furniture front, the display is not visible.
You can switch the optical display on or off.
Infolight *
infoLight
* depending on the features of your dishwasher
While the programme is running, a light spot shines
on the floor under the appliance door. Do not open the
appliance door until the light point is no longer visible
on the floor. If the appliance door is not completely
closed, the light spot flashes *. If the appliance
is installed at eye-level, with flush furniture front,
the light point is not visible. You can switch the Infolight
on or off.
Changing start programme
You can change the “Start programme” setting.