Gaggenau DF480701F, Инструкция по использованию и уходу

Страница: 37 / 48

Troubleshooting
en-us
37
Issue Cause and troubleshooting
E:6103 lights up. Water is not
draining.
Not an appliance error. High loop is missing and/or debris flushed back into drain
hose and blocked it.
▶
Be sure there is a high loop in the drain hose and that no debris has flushed back
into the hose.
E:6160 lights up. There is a technical error.
▶
Contact the after-sales service.
→
"Customer Service", Page 44
E:9001 lights up. Power voltage is too low.
There is no problem with the appliance.
1.
Call an electrician.
2.
Have the power voltage and electrical installation checked by an electrician.
E:9210 lights up. Spray arm rotation of the lower spray arm is blocked.
▶
Arrange the dishware so that it does not obstruct spray arm rotation of the lower
spray arm.
Lower spray arm is not correctly fitted.
▶
Fit the lower spray arm correctly.
E:9240 lights up. Filters are soiled or blocked.
▶
Clean the filters.
→
"Cleaning filters", Page 32
A different error code appears in
the display window.
E:0100 to E:9010
There is a technical issue.
1.
Press .
2.
Pull out the power cord plug of the appliance or switch off the breaker.
3.
Wait at least 2 minutes.
4.
Insert the power cord plug of the appliance in a power outlet or switch on the
breaker.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press ⁠.
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service
→
Page 44 and give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid →
Page 22
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 23
Cycle or cycle option has no drying phase, or drying phase is too short.
▶
Select a wash cycle with drying.
→
Page 12
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.