Gaggenau DF270100, Руководство пользователя

Страница: 58 / 68

en
Troubleshooting
58
Fault Cause Troubleshooting
Programme starts automat-
ically. You did not wait until pro-
gramme ended.
▶
→
"Terminate programme",
Page 38
Appliance stops during the
programme or cuts out. Appliance door is not closed
properly.
▶
Close the appliance door.
Power and/or water supply
has been interrupted.
1.
Check the power supply.
2.
Check the water supply.
Top basket is pressing
against inner door and pre-
venting appliance door from
being closed securely.
▶
Check whether the rear panel of the
appliance is being pressed in by a
socket or hose holder that has not
been removed.
▶
Arrange the tableware so that no
parts project beyond the basket
and prevent the appliance door
from closing properly.
All LEDs lit up or flashing. Electronics have detected a
fault.
1.
Press the main switch button for ap-
prox. 4 seconds.
→
"Controls", Page 16
The appliance is reset and restar-
ted.
2.
If the problem occurs again:
‒
Switch off the appliance.
‒
Pull out the mains plug or
switch off the fuse in the fuse
box.
‒
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse
box or insert the mains plug.
‒
Switch the appliance on.
3.
If the problem occurs again:
‒
Contact customer service.
→
"Customer Service",
Page 61
Mechanical damage
Fault Cause Troubleshooting
Appliance door cannot be
closed. Door lock has been activ-
ated.
▶
Close the appliance door with
greater force.
Door cannot be closed due
to installation method.
▶
Check whether the appliance has
been installed properly.