Gaggenau DF260161, Руководство по эксплуатации

Страница: 18 / 36

18
Operating the appliance
Operating the appliance
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
•
:
‹…
. Different influencing factors such as e.g. water
temperature or line pressure may result in deviations.
Aqua sensor
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is
replaced with fresh water. In the automatic
programmes the temperature and running time can
also be adjusted to the degree of soiling.
Switching on the appliance
1
Turn on the tap fully.
2
Open the door.
3
Switch on ON/OFF switch
(
.
The Eco 50° programme display flashes. This
programme remains selected if no other
programme button
0
is pressed. The expected
programme duration flashes on the digital
display
8
.
4 Press the START button
)"
.
5 Close the door.
The programme star ts running.
Note
- for environmentally friendly operation of the
dishwasher :
For ecological reasons the Eco 50° programme is
preset whenever the appliance star ts. This conser ves
environmental resources and not least saves you
money.
The Eco 50° programme is a particularly
environmentally friendly programme. According to
EU regulation 1016/2010 it is the “Standard
programme” which is the most ef ficient standard
cleaning cycle for cleaning normally soiled utensils
in terms of the combined energy and water
consumption for cleaning these types of utensils.