Gaggenau DF260161, Руководство по эксплуатации

Страница: 10 / 36

10
Utensils
Setting amount of rinse aid
The amount of rinse aid can be set from
§
:
‹‹
to
§
:
‹‡
. Please set rinse aid on
§
:
ܠ
to obtain very
good drying results (
§
:
ܠ
is already set in factory).
Change this setting, only if streaks (select lower
setting) or water stains (select higher setting) are left
on the utensils.
1 Open the door.
2 Switch on ON/OFF switch
(
.
3 Hold down programme button
#
and press
START button
)"
until
•
:
‹
.... is indicated on the
digital display.
4 Release both buttons.
The LED for button
#
flashes and the digital
display
8
displays the factor y setting
•
:
‹…
.
5
Press programme button
#
until the factor y set
value
§
:
ܠ
is indicated on the digital display
8
.
To change the setting:
1
Press programme button
3
.
Each time the button is pressed, the set value
increases by one level; when the value of
§
:
‹‡
has been reached, the display jumps back
to
§
:
‹‹
(off).
2
Press START button
)"
.
The set value is saved.
3
Close the door.
Switching off rinse aid refill indicator
If the rinse-aid refill indicator
P
is impaired (e.g.
when using combined detergents containing rinse aid
component), it can be switched off.
〉
Proceed as described under “Setting amount of
rinse aid” and set the value to
§
:
‹‹
.
The rinse aid refill indicator
P
is now switched off.
Utensils
Not suitable
〉
Cutler y and utensils made of wood.
〉
Delicate decorative glasses, craft and antique
utensils. These decors are not dishwasher-proof.
〉
Plastic par ts not resistant to heat.
〉
Copper and tin utensils.
〉
Utensils which are soiled with ash, wax,
lubricating grease or ink.
Aluminium and silver par ts have a tendency to
discolour and fade during the wash cycle. Even some
types of glass (e.g. crystal glass objects) may turn
cloudy after many wash cycles.
Glass and utensil damage
Causes:
〉
Glass type and glass production process.
〉
Chemical composition of the detergent.
〉
Water temperature of the wash programme.
Recommendation:
〉
Use only glasses and porcelain which the
manufacturer designates as dishwasher-proof.
〉
Use a detergent which protects utensils.
〉
Take glass and cutlery out of the dishwasher as
soon as possible after the programme ends.
Loading the dishwasher
1 Remove large food remnants. It is not necessar y
to prerinse utensils under running water.
2 Place the utensils so that
they are secure and cannot tip over.
all utensils with their openings face down.
parts with curves or indentations are at an
angle, thereby allowing water to drain.
does not obstruct rotation of the two spray
arms
1B
and
1J
.
Very small utensils should not be washed in the
machine, as they may fall out of the baskets.