Gaggenau DF211100, Инструкция по применению

Страница: 57 / 64

Customer Service
en
57
19.2 Protect appliance from
frost
If there is a risk of frost where the ap-
pliance will be standing, e.g. in a holi-
day home, empty the appliance com-
pletely.
▶
Empty the appliance.
→
"Transporting the appliance",
Page 57
19.3 Transporting the appli-
ance
To avoid damage to the appliance,
empty it before transporting.
Note:
Always transport the dish-
washer upright to prevent residual
water getting into the machine's con-
trols and damaging the appliance.
1.
Remove tableware from the appli-
ance.
2.
Secure loose parts.
3.
Switch on the appliance.
→
Page 32
4.
Select the programme with the
highest temperature.
→
"Programmes", Page 18
5.
Start the programme. → Page 33
6.
To drain the appliance, terminate
the programme after approx.
4 minutes.
→
"Terminate programme",
Page 34
7.
Switch off the appliance.
→
Page 34
8.
Turn off the water tap.
9.
To empty the residual water out of
the appliance, detach the supply
hose and let the water drain out.
19.4 Disposing of old appli-
ance
Valuable raw materials can be re-
used by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the
appliance, thereby putting their lives
at risk.
▶
With redundant appliances, unplug
the power cord. Then cut through
the cord and damage the lock on
the appliance door beyond repair
so that the appliance door will no
longer close.
1.
Unplug the appliance from the
mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an en-
vironmentally friendly manner.
Information about current disposal
methods are available from your
specialist dealer or local authority.
This appliance is la-
belled in accordance
with European Directive
2012/19/EU concerning
used electrical and elec-
tronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determ-
ines the framework for
the return and recycling
of used appliances as
applicable throughout
the EU.
20 Customer Service
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from