Gaggenau DF211100, Инструкция по применению

Страница: 52 / 64

en
Troubleshooting
52
Fault Cause and troubleshooting
Rust spots on cutlery.
▶
Do not wash rusting items.
Salt content in washing water is too high.
1.
Remove any spilled special salt from the tub.
2.
Screw the cap of the special salt dispenser on tight.
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray. Spray arms were blocked by tableware so detergent
was not rinsed out.
▶
Check that the spray arms are not blocked and can
rotate freely.
Detergent dispenser was damp when detergent was
added.
▶
Only add detergent to a detergent dispenser when
dry.
Excessive formation of
foam occurs. Hand washing-up liquid is present in dispenser for
rinse aid.
▶
Immediately add rinse aid to the dispenser.
→
"Adding rinse aid", Page 27
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care product used causes ex-
cessive foaming.
▶
Change the brand of detergent.
Connection to home
network is not estab-
lished. WLAN on router is not active.
▶
Check the wireless network connection of your
router.
WLAN display is flash-
ing. Connection to home network is not available.
▶
Activate the wireless network connection on your
router.
Home Connect cannot
be implemented cor-
rectly. Home Connect set incorrectly.
▶
Please consult the documents supplied for
Home Connect.
Technical fault is present.
▶
Please consult the information about support in the
documents supplied for Home Connect.
Special salt refill indic-
ator lights up. Insufficient special salt.
▶
Add Special salt → Page 25 .
Sensor does not detect special salt tablets.
▶
Do not use special salt tablets.