Gaggenau DF 460-161, Руководство по эксплуатации

Страница: 5 / 24

5
Getting to know your appliance
Diagrams of the control panel and the interior of the
appliance can be found in the envelope at the front.
Individual positions are referred to in the text.
Control panel
1
ON/OFF switch
2
Programme buttons **
3
Digital display
4
Display “Check water supply”
5
Salt refill indicator
6
Rinse-aid refill indicator
7
Timer programming display
8
Time delay
9
Additional options **
10
START button
11
Door Opener
** Number depending on model
Appliance interior
20
Interior light *
21
Top basket
22
Knife shelf *
23
Top spray arm
24
Tablet collecting tray
25
Intake opening
26
Blow opening (Zeolith container)
27
Bottom spray arm
28
Dispenser for salt
29
Filters
30
Cutlery basket
31
Bottom basket
32
Dispenser for rinse aid
33
Detergent dispenser
34
Lock for detergent dispenser
35
Rating plate
* depending on model
Water softening system
To ensure good washing results, the dishwasher
requires soft water, i.e. containing low amounts of lime,
otherwise white limescale will be deposited on the
utensils and inner container.
Tap water above 7
_
dH (from set value ) must be
softened.
The water is softened with salt (regeneration salt) in the
water softening system of the dishwasher.
The setting and therefore the required amount of salt
depends on the degree of hardness of your tap water
(see table).
Set
The amount of salt dispensed can be set from to
.
Sal is not required at the set value .
Find out about the hardness value of your tap water.
Your water supply company will assist you.
Set value can be found in the water hardness table.
Open the door.
Switch on ON/OFF switch
1
.
Hold down programme button
A
and press START
button
10
until on the digital display is indicated
.
Release both buttons.
The LED for button
A
flashes and the digital
display displays the factory setting .
To change the setting,
press programme button
C
.
Each time the button is pressed, the set value
increases by one level; when the value of
has
been reached, the display jumps back to (off).
Press START button
10
.
The chosen setting has now been stored.
Close the door.
Water hardness table