Gaggenau DF 460-161, Руководство по эксплуатации

Страница: 12 / 24

12
Additional options
* depending on model
Additional options
9
can be set with the buttons.
Turbo
*
The programme running time is reduced significantly in
the Turbo programme. The energy consumption is
increased by up to 30% due to more intensive heating.
The time reduction affects the following programmes:
Auto:
Time reduction up to 25 %
Eco: Time reduction up to 58 %
Energy Save
*
Water and energy consumption can be reduced with
the

Energy Save
"
function. The running time is
extended for optimum cleaning and drying results.
Half load
*
If you have only a few items to wash (e.g. glasses,
cups, plates), you can switch to “half load”. This will
save water, energy and time. It is recommended to put
a little less detergent in the detergent dispenser than
for a full load.
Hygiene
*
The temperature is increased during the rinsing
process. This increases the hygiene status. This
additional option is ideal for cleaning e.g. chopping
boards and baby bottles.
IntensiveZone
*
Perfect for a mixed load. You can wash very soiled pots
and pans in the lower basket together with normally
soiled utensils in the upper basket. The spray pressure
in the lower basket is intensified, the rinsing
temperature is increased slightly.
Extra drying
*
An increased temperature during the final rinse and an
extended drying phase mean that even plastic parts dry
well. There is a slight increase in the energy
consumption.
Washing the dishes
Programme data
The programme data (consumption values) can be
found in the summary of instructions. They refer to
normal conditions and the water hardness set value
. Different influencing factors such as water
temperature or line pressure may result in deviations.
Aqua sensor
*
* depending on model
The Aqua sensor is an optical measuring device (light
barrier) which measures the turbidity of the rinsing
water.
The Aqua sensor is used according to the programme.
If the Aqua sensor is active, “clean” rinsing water can
be transferred to the next rinse bath and water
consumption can be reduced by 3–6 litres. If the
turbidity is greater, the water is drained and is replaced
with fresh water. In the automatic programmes the
temperature and running time can also be adjusted
to the degree of soiling.
Zeolith drying
The appliance features a Zeolith-container. Zeolith is a
mineral which can store moisture and heat energy and
release them again.
During the washing step this heat energy is used to dry
the mineral and heat up the rinsing water.
During the drying phase moisture from the washing
compartment is stored in the mineral and heat energy
is released.
This released heat energy is blown into the washing
compartment with dry air. This accelerates and
improves drying.
These processes therefore save a great deal of energy.
Warning
Please ensure that the intake opening
25
is not
obstructed and do not place any temperature-sensitive
utensils in the lower basket at the rear right side above
the blow opening
26
.
Do not touch the blow opening
26
. The blow opening
becomes hot and, furthermore, any damage will result
in a callout by customer service.