11
For a large port, use the drain hose as it is.
1. For a small port, insert the rubber drain hose adaptor
into the drain hose end.
2. Obtain the Rubber Drain Hose Adaptor (J) spring clamp
from the Dishwasher Installation Kit
(do not substitute)
.
3. Insert the dishwasher drain hose into the
end of the
drain hose
(see
Figure 15
). Be sure to fully insert the
drain hose.
4. Use the clamp provided to attach the Rubber Drain Hose
Adaptor to the house plumbing as shown in
Figure 16
.
The dishwasher can be secured into its enclosure in 3 ways:
NOTE: If your dishwasher opening width measures
>23
5
/
8
″
(600 mm)
use the
TOP
or
SIDE MOUNT
mounting methods.
If your dishwasher opening width measures
23
5
/
8
″ (600 mm)
use the
ALTERNATE SIDE MOUNT
mounting method.
Figure 16
Figure 15
Before installing the supplied countertop mounting
brackets, decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
Installation of Mounting Brackets
Installation of Rubber Drain Hose Adaptor
Figure 17
Alternate Side Mount
for opening 23
5
/
8
″ (600 mm
). Insert
a side mount force distributor (M) in each side as shown in
Figure 18
.
Alternate Side Mount
Figure 18
M
M
M
J
G
C
Side Mount
is used for countertops made of marble, granite,
or other very hard materials that cannot be easily drilled.
Bend the mounting brackets along the small holes and in the
same direction as the two small tabs. Orient the mounting
brackets as shown in
Figure 17
, and position the two small
tabs on the mounting brackets over the two slots on the
dishwasher’s front corners. Push the mounting brackets
down firmly to insert the tabs into the slots. Bend perforated
edge down as shown.
Top Mount
is used for countertops made of wood or other
materials that can be easily drilled. Orient the mounting
brackets as shown in
Figure 17
and position the two small
tabs on the mounting brackets over the two slots on the
dishwasher’s front corners. Push the mounting brackets
down firmly to insert the tabs into the slots. The difference
in Top Mount and Side Mount is the screw will be placed and
secured in different holes of the mounting bracket (refer to
“Securing the Dishwasher” section on the next page).
11
Top and Side Mount
