10
en
Setting up the appliance
Hibernate mode
The appliance goes into hibernate mode if the function
selector is turned to
0
or if the child lock is activated.
The brightness of the display is dimmed in hibernate
mode during the first few minutes.
The display then switches itself off.
Notes
–
In Basic settings, you can select whether the
Gaggenau logo is to be displayed during hibernate
mode.
–
The brightness of the display depends on the
vertical viewing angle. You can adjust the display
using the "Brightness" setting in the basic settings.
Activating the appliance
To leave hibernate mode or to activate the display when
it has been switched off, turn the function selector.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Note:
If no drip tray is inserted, the appliance cannot be
switched on and no water will flow from the coffee
dispenser.
The message "Insert trays" appears.
Setting up the appliance
Setting up the appli
ance
Note:
Only use the appliance in frost-free areas. If the
appliance was transported or stored at temperatures
below 0 °C, you must wait for at least 3 hours before
using it.
Before the appliance can be switched on and used, it
must be assembled and connected according to the
enclosed installation instructions.
Initial settings
Notes
–
The query appears automatically when first
switched on after connection to a power outlet.
–
You can change the settings at any time.
1
Switch on the appliance at the main switch.
The preset language appears in the display.
2
Turn the rotary selector to select the required
display language.
3
Press
™
to confirm.
The temperature unit appears in the display.
4
Use the rotary selector to select the required
temperature unit.
5
Press
™
to confirm.
The preset capacity unit appears in the display.
6
Use the rotary selector to select the required
capacity unit.
7
Press
™
to confirm.
The preset weight unit appears in the display.
8
Use the rotary selector to select the required
weight unit.
9
Press
™
to confirm.
The display shows "Initial set-up complete".. Confirm
with
™
. The appliance is now ready to use.
Note:
If the language is changed, the system restarts.
This takes a few seconds.
'HXWVFK
6SUDFKH
