28
en
Emptying programme
11
If a water filter is used, reinsert it now.
12
Touch the
I
symbol.
The programme will run for approx. 7 minutes and
rinse the appliance.
The programme has finished.
13
Touch the
™
symbol.
The appliance is ready to use.
Fill the water tank with fresh water.
If the appliance is not used for a few days, the water in
the water tank should be replaced. The appliance must
be ready for use.
1
Rotate function selector to
S
.
2
Select "Fresh water replenishment" using the rotary
selector.
3
Touch the
™
symbol.
4
Touch the
I
symbol.
The tank is emptied and filled with fresh water.
Fresh water replenishment has finished.
5
Touch the
™
symbol.
The appliance is ready for use.
Emptying programme
Emptying programme
The emptying programme is a service programme which
is used to remove coffee bean residue and to prevent
damage caused by frost during transportation and
storage. The appliance must be ready for use.
1
Rotate function selector to
S
.
2
Select "Emptying programme" with the rotary
selector.
3
Touch the
™
symbol.
4
Empty the bean container and reinsert it.
5
If present, remove the milk container.
6
Close the door.
The emptying programme runs for
approx. 2 minutes.
7
Remove the brewing unit and clean it thoroughly.
8
Touch the
™
symbol.
9
Clean the drip tray with the filter, coffee residue
container, milk system and milk hose set thoroughly
and then reinsert them.
10
Close the door.
The emptying programme has finished.