17
Preparing beverages
en
Preparing hot water
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on.
1
Remove the milk tube from the milk container.
2
Rotate function selector to position 2.
3
Select "Hot water" using the rotary selector.
4
Place a cup or glass under the coffee dispenser.
5
Touch the
C
symbol.
6
Set the size using the rotary selector.
7
Touch the
C
symbol.
8
Set the temperature using the rotary selector.
9
Confirm with
™
.
10
Press
I
to start.
The water is heated and then flows into the cup or glass.
Notes
–
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
–
Using the
‡
symbol, you can save the current
beverage: Touch the
‡
symbol, turn the function
selector to a free memory location and save the
entry.
"Individual beverages" on page 18
Setting the grinding level
m
Warning – Risk of injury!
Do not reach into the grinding unit.
Using the slider for the grinding level, the desired
fineness of the ground coffee can be set between a fine
grinding level (left) and a coarser grinding level (right).
Notes
–
The new setting only becomes noticeable after the
second cup of coffee.
–
Set a finer grinding level with dark-roasted beans
and a coarser grinding level with lighter beans.
–
If the display shows the message "Set coarser
grinding level", the coffee beans are being ground
too finely. Set a coarser grinding level. To do so,
slide the slider to the right.
–
Only make small changes to the grinding level
setting.
Changing bean type
If you are using a new type of bean, the Empty grind
function allows you to run the grinding unit until empty
of your previous bean type.
The appliance must be switched on.
1
Remove the bean container and empty out the
beans.
2
Add the new beans and reinsert the bean container.
The message "New type of coffee beans in bean
container?" appears.
3
Press
™
to confirm.
The grinding unit is then emptied of your previous bean
type in two grinding stages.
Note:
This message always appears when the bean
container is inserted. If you do not want to empty the
grinding unit, e.g. when only refilling with beans,
confirm with
'
.
