![Gaggenau CMP 250 Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/gaggenau/cmp-250/cmp-250_instruction-manual_555994014.webp)
14
7
Set the strength using the rotary selector.
8
Touch the
C
symbol.
9
Set the temperature using the rotary selector.
10
Confirm the settings using
™
.
11
Press
I
to start.
The beverage is brewed and then runs into the cup.
Notes
‒
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
‒
Using the
‡
symbol, you can save the current
beverage: touch the
‡
symbol, turn the function
selector to a free memory location, save the entry
(see section
Individual beverages
).
Preparing two cups at the same time
1
Turn the function selector to position 2.
2
Use the beverage selector to select either
"2x coffee" or "2x espresso".
3
Place a cup under each of the two coffee
dispensers.
4
Press
I
to start.
- or -
First touch the
C
symbol, then use the rotary
selector to set the quantity, strength and
temperature and confirm using
G
.
The beverage selected is brewed and then dispensed
into the cups.
Note:
The coffee is prepared in two stages. Wait until
the process is fully completed.
Preparing coffee using ground coffee
The appliance must be switched on and the water tank
must be filled.
1
Turn the function selector to position 2.
2
Pull out the appliance from the built-in unit
(see section
Pulling out the appliance
).
3
Using the measuring spoon, fill the ground coffee
drawer with a maximum of two level spoons of
ground coffee. Close the ground coffee drawer.
Note:
Do not fill the drawer with beans or instant
coffee.
4
Slide the appliance into the built-in unit as far as it
will go.
5
Use the rotary selector to select the desired
beverage (beverages made from ground coffee are
identified with the
x
symbol).
6
Place a cup under the coffee dispenser.
7
Touch the
C
symbol.
8
Set the quantity using the rotary selector.
9
Touch the
C
symbol.
10
Set the temperature using the rotary selector.
11
Confirm the settings using
™
.
12
Press
I
to start.
The beverage is brewed and then runs into the cup. To
prepare another cup, refill with ground coffee and
repeat the process.
Notes
‒
While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
‒
If coffee is not dispensed within 90 seconds, the
brewing chamber empties itself automatically to
prevent an overflow.
‒
The Aroma function is unavailable when using
ground coffee. Similarly, it is not possible to
dispense two cups at once when using ground
coffee.
6WURQJ
+RW