Gaggenau CI 262, Инструкция по эксплуатации

Страница: 27 / 36

27
To access the basic settings:
The hob must be off.
1 Switch on the hob.
2 Touch the
t
symbol within the next 10 seconds.
The first four displays provide product information.
Turn the twist knob to view the individual displays.
3 Touch the
t
symbol again to access the basic
settings.
™‚
and
‹¯
light up as a presetting in the displays.
4 Touch the
t
symbol repeatedly until the required
function is displayed.
5 Then use the twist knob to select the required
setting.
6 Touch the
t
symbol for at least 4 seconds.
The settings have been saved.
Leaving the basic settings
Turn off the hob with the main switch.
Suitability test of tableware
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1 With the cookware still cold, fill it with approx.
200 ml of water and place it on the centre of the
hotplate with the diameter that most closely
matches that of the base of the cookware.
2 Go to the basic settings and select the
™ˆ
setting.
3 Touch the control panel.
A
will flash on the hotplate
display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear in the hotplate display.
Check the result using the following table:
To reactivate this function, touch the settings range.
Notes
‒ If the diameter of the hotplate used is much smaller
than the diameter of the cookware, only the middle
of the cookware can be expected to heat up. This
may result in the cooking results not being as good
as expected or being less than satisfactory.
‒ You can find information on this function in the
section on
~
"Basic settings"
‒ You can find information on the type, size and
positioning of the cookware in the section on
~
"Cooking with induction"
Product information Display
Directory for the technical after-sales service
(TK)
‹‚
Production number
”š
Production number 1
Š†
.
Production number 2
‹
.
†
W
W
Result
‹
The cookware is not suitable for the hotplate and will
therefore not heat up.*
‚
The cookware is taking longer to heat up than expected
and the cooking process is not going as well as it
should.*
ƒ
The cookware is heating up correctly and the cooking
process is going well.
* If there is a smaller hotplate available, test the cookware
again on the smaller hotplate.
X|
É
Y| [|
\|
Z|